First lock the 4 screws on the corner connectors, then take out 4 pieces of M5 nuts and put 2 in the groove of each side of the frame.Take out 2 pieces of aluminum profile with length of 460mm, fixed with 2 pieces of M5*25.Pay attention to the installation direction. Take out 1 piece of aluminum profile with length of 540mm and put 2 corner connectors into the groove.Please take care the laser engraver when it is working.
Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands.Serious physical harm is possible if used improperly. Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut.
Please avoid strongly impact on the machine. Minors of any age should not use this laser without direct Adult supervision and proper eye protection Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Please set up laser engraver in the fireproofing area, with good ventilation. Do NOT operate laser without eye protection (Laser goggles). The Laser Master 20W is higher power and supports a faster engraving and cutting. The Laser Master 15W is most cost effective, available for both of engraving and cutting. The Laser Master 7W is especially good at picture engraving. Exposure Duration Detection and Limitation, if laser engraver under control, but user forget to operate and keep the laser beam working, extra safety will cut off in case motor stopped moving, to prevent fire. Laser Beam Safety Guard, if your computer system halted or USB cable disconnected, led to that the laser engraver stop moving, the laser beam will stop, to prevent fire. If the machine detects unauthorized movement, the laser beam will stop. There is a G-sensor on the motherboard for active position protection. This Laser Master 2 laser engraver is a desktop laser engraver, for PROFESSIONAL USE only, by skilled workers. Please Observe Safety Instructions! Brief Introduction Non-professionals, DO NOT Operate This Laser Engraver! 56 Maxin Road, Changping Town, Dongguan 523565, Guangdong Province, China Dongguan Ortur Intelligent Technologies Co., Ltd.Īddress: No.
0 kommentar(er)
